removing asbestos walls
Safe identification, controlled removal and compliant disposal of asbestos wall linings in homes, units and domestic properties.
Safe residential asbestos removal
Removing asbestos walls is not a job to start with a hammer
Wall linings in older Australian homes can contain asbestos, particularly where fibrous cement sheets were used in wet areas, kitchens, laundries, garages, extensions and utility rooms. The material may look like ordinary cement sheeting, so appearance alone is not enough to confirm whether asbestos is present.
Cutting, drilling, sanding, breaking or pulling apart a suspected asbestos wall can release fibres into the air and spread contamination through a home. C&A Asbestos Removal Pty Ltd provides a careful, end-to-end service—from the initial site assessment through to controlled dismantling, clean-up, transport and disposal.
Do not disturb a wall you suspect may contain asbestos. Keep people away from the area and contact C&A for advice and a site inspection.
Identifying the material
What types of residential walls may require asbestos removal?
Asbestos-containing materials were used in a range of Australian residential building products. During an inspection, we consider the age and construction of the property, the type of sheeting, its condition and how it has been fixed.
Internal wall linings
Fibrous cement sheets may be present behind wall finishes or as exposed linings in older rooms, hallways, laundries, garages and extensions.
Wet-area wall sheets
Bathroom, kitchen, laundry and toilet renovations can uncover older wall sheeting that needs assessment before tiles, cabinetry or fixtures are removed.
External wall sheets
Older external wall cladding, rear additions, garages and enclosed verandas may include asbestos-containing cement sheeting.
Renovation areas
If walls need to be removed for a renovation, extension, reconfiguration or sale, we can help establish a safe removal plan before work begins.
Damaged or deteriorating sheets
Cracked, broken or weathered wall linings may require urgent professional advice to prevent further disturbance and manage the area safely.
Uncertain materials
When the material cannot be confirmed visually, C&A can advise on the next step, including sampling and laboratory analysis where required.
Step one
How C&A identifies suspected asbestos wall linings
A safe removal begins with understanding what is on the property and how it can be accessed. C&A starts with a conversation about the home, the room involved and your planned work. A site inspection can then be arranged to assess the wall lining and the surrounding conditions.
Visual inspection can identify materials that warrant further investigation, but it cannot reliably prove that a product is asbestos-free. Where confirmation is needed, appropriate sampling and laboratory analysis may be recommended before removal or renovation proceeds.
Discuss the property and planned work
Tell us which walls are involved, whether the material is damaged and when you need the work completed.
Inspect the wall and access conditions
We assess the sheeting, fixings, condition, room layout, ventilation, access and nearby areas that may need protection.
Confirm the safest way forward
We provide a clear scope of work and explain whether sampling, additional controls or specialist monitoring is needed.
A site inspection gives you a practical plan
Before work starts, you should know which materials are being addressed, how the work area will be controlled, how the waste will be handled and what will happen when the removal is complete.
- Clear scope of work for the affected walls
- Removal method suited to the material and room
- Containment, clean-up and disposal requirements
- Documentation for your property records
Step two
Containment comes before the wall comes down
Containment is designed to prevent asbestos fibres and contaminated dust from moving beyond the work area. The exact controls depend on the room, the material, the condition of the sheets and the access available at the property.
C&A uses appropriate personal protective equipment, wet methods and controlled work zones as standard practice. We communicate what needs to be kept clear and help reduce unnecessary disruption to the rest of your home.
Work zone control
The affected area is isolated and managed to limit access and the movement of dust.
Wet removal methods
Materials are dampened as appropriate to help suppress the release of airborne fibres.
Protective equipment
Our team uses suitable PPE and follows controlled procedures for the work being performed.
Clear communication
You receive practical instructions about access, pets, occupants and the removal schedule.
Step three
Our asbestos wall removal process
C&A manages the removal carefully from preparation to final documentation, so homeowners do not have to coordinate multiple contractors for the asbestos component of the job.
Prepare the property and work area
We confirm the scope, establish the controlled area and put the agreed safety measures in place. Household occupants, visitors and pets should remain outside the work zone while removal is underway.
Dismantle the wall lining in a controlled manner
Wall sheets are handled with care and removed using wet methods and procedures intended to minimise breakage and fibre release. We avoid unnecessary cutting, sanding or mechanical disturbance of asbestos-containing materials.
Package and label asbestos waste
Removed materials are packaged appropriately on site, double-bagged where required and labelled for asbestos waste handling. This helps protect everyone involved in the removal, transport and disposal chain.
Clean the affected area
After removal, the work area receives a controlled clean-up. C&A focuses on leaving the site tidy and safe for the next stage of your renovation or building work.
Transport, disposal and documentation
Asbestos waste is tracked and transported to an EPA-licensed disposal facility. C&A provides disposal documentation after the job for your records, helping you maintain a clear compliance trail.
A professional, direct service
A calmer way to manage asbestos in your home
Discovering suspected asbestos during a renovation can be stressful. C&A Asbestos Removal gives homeowners a clear point of contact and a practical plan, without sending you through a call centre or leaving you to work out the disposal process yourself.
Direct communication
Speak directly with the team about your property, timing and removal requirements.
Clear scopes and documentation
Know what is included, how the work will be controlled and where the waste is taken.
Tidy site practices
We respect your home and work to leave the affected area clean and ready for the next stage.
Residential wall removal that covers the full process
C&A follows Safe Work Australia's Code of Practice for asbestos removal and applies appropriate controls to the conditions of each job. Independent hygienist air monitoring can also be coordinated when required by the project or circumstances.
Service area
Australia-wide
Quote type
Free and no obligation
Waste handling
Licensed disposal facilities
Communication
Direct mobile contact
What to do if you suspect asbestos in a wall
Taking a cautious approach can help prevent accidental disturbance while you arrange a professional assessment.
Stop disturbing it
Do not drill, cut, sand, scrape, break or remove the wall lining yourself.
Keep people away
Restrict access to the area, especially for children, visitors and pets.
Share details safely
Tell us the property age, location of the wall and whether it has been damaged.
Arrange an inspection
Get a professional assessment before renovation, demolition or wall repairs begin.
Frequently Asked Questions About Removing Asbestos Walls
How can I tell if a wall contains asbestos?
You generally cannot confirm asbestos by sight alone. The age of the property, the appearance and type of sheeting, its location and construction details can indicate that testing or professional assessment is appropriate. C&A can inspect the area and advise on the safest next step. Do not disturb the material while waiting for advice.
Can I remove asbestos wall sheeting myself?
DIY removal is not recommended. Asbestos wall sheets can release hazardous fibres when they are broken, cut, drilled, sanded or incorrectly handled. Licensing, notification, safety and disposal requirements can also vary between Australian states and territories and according to the job. A licensed asbestos removal contractor can assess the work and apply the required controls.
What happens during an asbestos wall site inspection?
C&A considers the wall material, its condition, fixings, room layout, access, nearby surfaces and your planned renovation or demolition work. We can explain whether sampling or laboratory analysis is needed and provide a clear scope for removal, containment, clean-up, transport and disposal.
How are asbestos walls contained during removal?
The work area is controlled according to the conditions of the job. This may include restricting access, establishing containment zones, using appropriate PPE, applying wet methods and protecting surrounding areas. The specific approach is determined during planning and is intended to prevent unnecessary spread of dust and fibres.
How is removed asbestos wall material disposed of?
Removed asbestos materials are packaged and labelled appropriately, then transported through the compliant waste-handling process to an EPA-licensed disposal facility. C&A provides disposal documentation after the job so you have a record of where the asbestos waste was taken.
How much does residential asbestos wall removal cost?
The cost depends on the number and size of wall sheets, material condition, access, containment requirements, location and disposal needs. Contact C&A for a free, no-obligation quote and arrange a site inspection so the scope can be assessed properly.
Can C&A remove walls before my renovation starts?
Yes. C&A works with homeowners, renovators and property investors who need suspected asbestos wall linings addressed before other building work begins. Planning the removal early can help avoid delays and gives your builder a clearer, safer site to work on.
Schedule a site inspection for your suspected asbestos walls
Speak directly with C&A Asbestos Removal about the wall lining in your home. We can discuss the property, arrange an inspection and provide a clear, no-obligation quote for safe residential asbestos removal.
Australia-wide service | cheataanny@gmail.com