asbestos in shed
Safe assessment, dismantling and EPA-compliant disposal of asbestos-containing sheds across Australia.
C&A Asbestos Removal provides licensed, end-to-end shed asbestos removal—wet-method dismantling, double-bagging on site and transport to EPA-licensed disposal facilities with full paperwork.
Licensed, compliant, and fully documented shed asbestos removal.
Why sheds are a frequent source of asbestos
Many Australian sheds, garages and outbuildings constructed before the early 1990s used fibrous cement sheeting, corrugated roofing and other materials that can contain asbestos. These materials were durable and affordable at the time, but now pose a health risk if disturbed.
Asbestos in sheds is often hidden behind paint, insulation, or timber framing. Renovations, demolition or weather damage can cause fibres to be released — which is why professional assessment and removal is essential.
C&A Asbestos Removal inspects sheds, identifies common ACM (asbestos-containing materials), then plans and carries out a safe, compliant removal using containment, wet methods and specialist PPE.
Common asbestos-containing shed materials
Knowing the likely materials helps plan the safest removal method. We handle all of the following safely and compliantly.
Corrugated Fibro Roofing
Old corrugated fibre cement panels used for shed roofs are brittle and release fibres when broken. We remove panels using wet methods and secure handling.
Wall Sheeting & Cladding
Fibrous cement wall sheeting and exterior cladding can contain asbestos. We remove sheets intact where possible, control dust and double-bag waste.
Insulation & Gaskets
Insulation materials, gaskets or window seals in older sheds may contain asbestos. We sample and treat these materials with the same care as sheeting.
Eaves, Soffits & Flashings
Small accessory pieces often contain asbestos and require careful removal to avoid contamination of surrounding areas.
Painted & Weathered Panels
Painted or weather-damaged fibre cement panels can still contain asbestos — we treat all suspect panels as ACM until tested otherwise.
Bolts, Fixings & Contaminated Debris
We decontaminate and bag small fixings and debris to ensure the whole site is safe before handover.
How C&A removes asbestos from sheds — safe, compliant, documented
Initial assessment & quote
Call or email to describe your shed. We'll provide a free initial quote and arrange a site visit when needed to scope access, material types and volumes.
Risk assessment & removal plan
We develop a risk control plan tailored to your site: containment zones, entry controls, PPE levels and whether an independent hygienist is required for air monitoring.
Controlled wet-method dismantling
Our team uses wet methods to suppress fibres, removes sheets and panels carefully to avoid breakage, and isolates the work area to protect adjacent property and neighbours.
Double-bagging and labelling on site
All asbestos waste is double-bagged, labelled and stored securely before transport. We handle contaminated debris and small fixings with the same care to prevent cross-contamination.
EPA-compliant transport & disposal
We transport waste to EPA-licensed facilities only. After disposal you receive full tracking and disposal documentation for your records or strata files.
Site handover & documentation
We leave the site clean, remove contamination, and provide a written scope of work and disposal receipts. Independent air monitoring can be coordinated if required.
Professional removal, respectful of your property
C&A treat every site like a home. We protect gardens, driveways and neighbouring properties, keeping disruption to a minimum and leaving the site tidy after work is complete.
You'll speak directly with our small team — no call-centre — and get clear documentation and disposal receipts after each job.
Free quotes, Australia-wide. Call 0426 366 938 or request a quote below.
Frequently Asked Questions
How do you know if my shed contains asbestos?
Sheds built before the early 1990s commonly used fibrous cement products that may contain asbestos. We visually inspect, take samples if needed, and treat suspect material as ACM until testing confirms otherwise.
Can you remove the shed structure entirely?
Yes. We offer full demolition of small to medium sheds and careful dismantling of larger structures. All asbestos materials are handled and disposed of in line with Safe Work Australia guidance and EPA requirements.
Is DIY removal permitted?
DIY removal of asbestos is strongly discouraged and may be illegal depending on the quantity and jurisdiction. Incorrect removal can release fibres and create long-term health risks. Use a licensed removalist for safety and compliance.
What happens to the waste after removal?
All waste is double-bagged, labelled and transported to EPA-licensed disposal facilities. We provide transport tracking and disposal receipts as part of our service so you have a documented audit trail.
Get your shed assessed and quoted today
C&A Asbestos Removal offers fast, clear quotes and licensed removal Australia-wide. We follow Safe Work Australia codes and use EPA-licensed disposal only.
Prefer email? cheataanny@gmail.com — or use the quick quote link above to request a free site quote and scope.