asbestos roof removal
Safe, licensed removal of asbestos roof sheeting, corrugated panels, eaves and ridge capping—Australia-wide.
C&A Asbestos Removal follows Safe Work Australia guidance: wet methods, containment zones, double-bagged waste and EPA‑licensed disposal. We provide clear communication, fast response and full disposal documentation.
Licensed, insured and compliant with Australian WHS codes
Why asbestos roofs need specialist removal
Many Australian homes and commercial buildings constructed before the early 1990s used asbestos-containing fibrous cement sheets for roof cladding, eaves and ridge capping. When those materials are disturbed — during repairs, renovations, or storm damage — airborne asbestos fibres can be released and pose a long-term health risk.
Roof removals are higher risk: working at height, brittle sheets, and complex roof penetrations (skylights, vents, flashings) increase the chance of damage. That’s why licensed removalists use controlled wet methods, containment and experienced teams to protect occupants and neighbours.
Common asbestos roof types we remove
C&A removes a wide range of asbestos roofing materials safely and compliantly.
Corrugated roof sheeting
Classic corrugated asbestos cement sheets on homes, sheds and garages — removed sheet-by-sheet using wet suppression and containment.
Fibrous cement roof sheets
Large flat sheets used on period homes and commercial buildings — we manage fragile sheets safely to prevent breakage and fibre release.
Eaves, soffits & ridge capping
Smaller fixings and flashings often contain asbestos too — we remove these components with the same controlled approach.
Skylights & penetrations
Areas around skylights, vents and gutters require careful cutting, containment and sealing — we coordinate safe access and removal.
Commercial & strata roofs
Small-to-medium commercial roof projects managed to minimise downtime and ensure compliant removal and disposal.
Storm-damaged and fragile roofs
We stabilise fragile areas, remove dangerous sheets and secure the site for follow-up works or re-roofing.
Our asbestos roof removal process (wet-methods & containment)
Initial inspection & risk assessment
We assess roof type, sheet condition, access and surrounding hazards. The risk assessment and control plan defines exclusion zones, equipment and PPE required.
Containment & safe access
We install scaffolding, drop-sheets and temporary containment where required. Non-essential areas are restricted to protect occupants and neighbours.
Wet-method dismantling
We keep sheets and fixings damp using low-pressure sprays to suppress dust. Sheets are handled carefully to prevent breakage, then lifted and staged for packaging.
Double-bagging and labelling on-site
All waste is double-bagged, labelled and sealed. We use covered bins or cages on-site to avoid re-exposure before transport.
Licensed transport & EPA disposal
Waste is transported to EPA‑licensed facilities only. We provide full disposal documentation and tracking for your records.
Final clean and documentation
We perform a thorough post-removal clean. Where required, we arrange independent air monitoring and issue a completion report and disposal certificates.
Frequently Asked Questions
How do you remove asbestos roof sheets without releasing fibres?
We use wet-methods to suppress dust, handle sheets carefully to avoid breakage, install containment where needed, and double-bag all waste. Our team wears appropriate PPE and follows a site-specific control plan to minimise fibre release.
Can I legally remove a small section of asbestos roof myself?
Regulations vary by state and depend on the amount and type of asbestos. DIY removal is not recommended due to health risks and possible legal obligations. C&A provides free advice and will tell you if a licensed removalist is required.
How long does a roof removal take?
Timing depends on roof size, access, and the condition of sheets. Small residential roofs can often be removed in a day; larger or complex jobs (commercial, fragile sheets, or extensive containment) take longer. We'll provide a clear schedule in your quote.
Will you provide disposal paperwork?
Yes. We transport waste to EPA‑licensed facilities and provide full disposal documentation and tracking details as part of our completion paperwork.
Get a free quote for asbestos roof removal
Fast, no-obligation quotes. Licensed removal, wet-methods, contained works and EPA-compliant disposal—Australia-wide.